Hi Steve,
when I create a new account shoutcast2 and sc-trans2 on CC3 with "auto" port assignment, the panel ALWAYS open a range of 6 ports.
For example if the first port is 9060, the last port used is 9065.
Look theese extract from configuration files:
sc_serv:
; 1 to do reverse DNS look ups on incoming IP addresses Default = 0
namelookups=0
; port that clients and sources connect to (note, shoutcast 1 sources only connect to portbase+1) Default = 8000
portbase=9060
; how long before an idle source is dumped (in seconds). Zero means no timeout Default = 30
autodumpsourcetime=30
; maximum size of an HTTP header line Default = 2048
maxheaderlinesize=2048
; max headers lines in HTTP style exchange Default = 100
maxheaderlinecount=100
; password for broadcaster to connect
password=xxxxxxxxx
; administrator password
adminpassword=xxxxxxxxx
sc_trans2:
;; ENCODER OPTIONS (MULTI)
endpointname_1=/stream
outprotocol_1=3
serverip_1=xxx.xxx.xxx.xxx
serverport_1=9060
password_1=xxxxxxxxxx
uvoxuserid_1=
uvoxnewmetadata_1=1
uvoxmetadatafudgefactor_1=0
shoutcastmetadatafudgefactor_1=0
encoder_1=mp3
bitrate_1=128000
channels_1=2
samplerate_1=44100
mp3mode_1=0
mp3quality_1=0
streamid_1=1
endpointname_2=/stream64
outprotocol_2=3
serverip_2=xxx.xxx.xxx.xxx
serverport_2=9060
password_2=xxxxxxxxx
uvoxuserid_2=
uvoxnewmetadata_2=1
uvoxmetadatafudgefactor_2=0
shoutcastmetadatafudgefactor_2=0
encoder_2=aacp
bitrate_2=64000
channels_2=2
samplerate_2=44100
mp3mode_2=0
mp3quality_2=0
streamid_2=2
;;;; DJ SUPPORT:
; dj listen port
djport=9062
djport2=9064
djcipher=
; idle time until auto-dump
autodumpsourcetime=30
; record dj broadcasts here
;djbroadcasts=c:\sc_trans\recorded\
;djcapture=
;djfilepattern=
;djlogin_0=
;djpassword_0=
;djpriority_0=1
;;;; MP3 ENCODING
unlockkeyname=xxxxxx xxxxxx
unlockkeycode=xxxxxxxxxxxxxxx
;; REPLAY GAIN CONTROL:
applyreplaygain=0
calculatereplaygain=0
;;; OTHER:
adminport=9065
adminuser=xxxxxxx
adminpassword=xxxxxxxxxx
You can see:
9060: for the shoutcast server
9062 & 9064: for DJ ports
9065: For adminport
But if after I create a new server "auto"... CC3 start from 9065, so go in conflict with the admin port of the previous server.
I try many times in all range of ports... but the behavior is the same everywhere.
If I assign manually the first port... everything works fine.
Th CC3 build is the last of 13/12.
Is it normal?