Centova Technologies Forum
Centova Cast v3 => Bugs and issues => Topic started by: ruaduck on June 30, 2020, 01:10:02 pm
-
I am running into the issue with a new install Cluster host authentication failure.
So i have had CentovaCast for some time running on a different server. The server was completely lost and so i had to reinstall it on a new server.
I Chose CentOS 7; i have everything installed and can get into the control panel; however when i go to the status of my server i get Cluster host authentication failure. I can't seem to get past this. I have checked all ports and they are open in the firewall. I have copied and pasted my re-issued key into server info.
-
Sorry, i also forgot
I ran /etc/init.d/centovacast restart which restarted just find and shows they are up
-
So i totally destroyed my current install and made sure i did the install with --deps. Then after everything was ran i did a restart and all seems to be working fine now.
-
Usually this indicates that you didn't properly copy over the contents of the file:
/usr/local/centovacast/etc/rpcshadow
to your new server.
In addition, you have to set it up in Management > Hosts section.