Centova Technologies Forum

Centova Cast v3 => Bugs and issues => Topic started by: Gabriel Castro on February 27, 2013, 05:10:29 am

Title: Auto Dj not working after import
Post by: Gabriel Castro on February 27, 2013, 05:10:29 am

Hello!

  I did an import from v2 to v3. Everything seems to have copied. The only problem that i see is that when you start a station on v3 that had auto dj in v2 it will start the server but not auto dj. I also went inside station configuration to see if need to enable it but there is no auto dj tab. I only see media library & playlist buttons on the left column. Please advice.

Title: Re: Auto Dj not working after import
Post by: Centova - Steve B. on February 27, 2013, 12:34:26 pm

Thank you!  This is fixed and a new build is available on the download server.

Title: Re: Auto Dj not working after import
Post by: Gabriel Castro on February 27, 2013, 02:58:54 pm

Hello, Steve.

 I used  /usr/local/centovacast/sbin/update and still have the same issue.

Title: Re: Auto Dj not working after import
Post by: Centova - Steve B. on February 27, 2013, 03:36:41 pm

It was a bug in the upgrader; you need to re-perform the upgrade.

Title: Re: Auto Dj not working after import
Post by: Gabriel Castro on February 27, 2013, 03:56:49 pm

On top of my current installation or remove centova and re-install?

Title: Re: Auto Dj not working after import
Post by: Centova - Steve B. on February 27, 2013, 03:58:13 pm

You can just reinstall v3 per the sticky and then re-run the upgrade again.

Title: Re: Auto Dj not working after import
Post by: Gabriel Castro on February 28, 2013, 07:05:52 am

Fixed. Working perfect. So far the only thing i notice is that their is a graphic missing in the stations list when you arrange ascending and descending. The UP graphic is missing. See attached.