Centova Technologies Forum
Centova Cast v3 => Bugs and issues => Topic started by: ghudson on October 31, 2012, 09:53:43 pm
-
When trying to start Shoutcast 1 server i get the following error;
Could not start server: Application binary has not been configured for ShoutCast on Local server
have run
/usr/local/centovacast/sbin/enable_package shoutcast1 /usr/local/centovacast/shoutcastv1/sc_serv
When trying to start Icecast server i get the following error;
Could not start server: Application binary has not been configured for IceCast on Local server
When trying to start Shoutcast 2 server i get the following error;
Server exited immediately after startup
Anyone have any ideas, it seems there are even more problems with the latest build
George
-
Ran command
tail -n 15 /usr/local/centovacast/etc/cc-control.conf
Output
root@server1 [~]# tail -n 15 /usr/local/centovacast/etc/cc-control.conf
# specify the full pathnames to your application binaries below; note that
# this is normally handled automatically by Centova Cast's application
# installer, i.e., to install IceCast, you'd just use:
# /usr/local/centovacast/sbin/update --add icecast
# And the ICECAST_BIN option below would be configured automatically.
SHOUTCAST_BIN=
ICECAST_BIN=
ICES2_BIN=
ICESCC_BIN=
EZSTREAM_BIN=
SCTRANS_BIN=
ICES_BIN=/usr/local/ices//bin/ices
SCTRANS2_BIN=/usr/local/src/sctrans/sc_trans
SHOUTCAST2_BIN=/usr/local/centovacast/shoutcastv2/sc_serv
SHOUTCAST1_BIN=/usr/local/centovacast/shoutcastv1/sc_serv
root@server1 [~]#
can you help??
George
-
Can you try downloading the today's build and trying this again? I believe this should be fixed by the latest installer/updater changes -- we can't reproduce it here.
-
Thanks Steve
When i try an update i get the following;
RPM build errors:
user karl does not exist - using root
group karl does not exist - using root
Bad exit status from /var/tmp/rpm-tmp.39392 (%prep)
rpmbuild exited with error; check your rpmbuild configuration
Installer exited with error, aborting
George
-
That's the same issue you noted in this thread (http://forums.centova.com/index.php?topic=1982.msg5079) and is the result of an incompatibility between the official IceCast 2.3.2 SRPM and newer versions of CentOS. You need to use --icecast-fromsrc as you did in the other thread.
And apparently the IceCast developers are no longer distributing an IceCast RPM or SRPM, so we're left to use the outdated one or build from source... nothing's ever easy. :)
If I knew exactly what triggered the incompatibility with the SRPM I'd add detection for it and default to a source build, but I'm not sure what it is... it may just be a particular CentOS revision... are you on CentOS 5 or 6?
-
Hi Steve
I'm using Centos 5 32bit
George
-
Hi Steve,
After installing latest build
root@server1 [~]# tail -n 15 /usr/local/centovacast/etc/cc-control.conf
# specify the full pathnames to your application binaries below; note that
# this is normally handled automatically by Centova Cast's application
# installer, i.e., to install IceCast, you'd just use:
# /usr/local/centovacast/sbin/update --add icecast
# And the ICECAST_BIN option below would be configured automatically.
ICES_BIN=
ICES2_BIN=
EZSTREAM_BIN=
SCTRANS_BIN=
SHOUTCAST2_BIN=/usr/local/centovacast/shoutcast2/sc_serv
SCTRANS2_BIN=/usr/local/centovacast/sctrans2/sc_trans
ICESCC_BIN=/usr/local/centovacast/ices//bin/ices
SHOUTCAST_BIN=/usr/local/centovacast/shoutcast1/sc_serv
ICECAST_BIN=/usr/local/icecast/bin/icecast
root@server1 [~]#
Have not tested fresh installation yet will let you know of any problems
Thanks again Steve
George
-
I'm on centos 6 64x and my build crashed also.
mine crashed like George's here trying to access non-existant data or path, my case an old redhat dir. /usr/src/redhat which gave : no file or directory error and crashed
I havent seen a dir name like that in sometime. not sure if that helps at all but more to log for Centos builds
-
When reaching database settings stage at
http://xxx.xxx.151.57:2199/install.php?step=settings
after completing database settings & proceeding results in giving me
Sorry, an error occurred while attempting to load the requested page.
if i then enter
http://xxx.xxx.151.57:2199
it takes me then to login
when to go to hosts
http://xxx.xxx.151.57:2199/admin/index.php?page=rpchosts
all the settings are empty, i will try to import an earlier backup of Hosts sql
Will then let you know if any further problems
George
-
Updated missing rpchosts SQL
-- Table structure for table `rpchosts`
--
CREATE TABLE IF NOT EXISTS `rpchosts` (
`id` int(10) unsigned NOT NULL AUTO_INCREMENT,
`ipaddress` varchar(16) NOT NULL DEFAULT '',
`port` int(10) unsigned NOT NULL DEFAULT '2198',
`authkey` varchar(255) NOT NULL DEFAULT '',
`title` varchar(128) NOT NULL DEFAULT '',
`isrelay` tinyint(3) unsigned NOT NULL DEFAULT '0',
`ismaster` tinyint(3) unsigned NOT NULL DEFAULT '1',
`defaultip` varchar(16) NOT NULL DEFAULT '',
`daemontype` varchar(16) NOT NULL DEFAULT 'RPC',
`hostname` varchar(255) NOT NULL DEFAULT '',
PRIMARY KEY (`id`),
UNIQUE KEY `id` (`id`)
) ENGINE=MyISAM DEFAULT CHARSET=utf8 AUTO_INCREMENT=2 ;
--
-- Dumping data for table `rpchosts`
--
INSERT INTO `rpchosts` (`id`, `ipaddress`, `port`, `authkey`, `title`, `isrelay`, `ismaster`, `defaultip`, `daemontype`, `hostname`) VALUES
(1, '127.0.0.1', 2198, 'jSxC5nKRyYmXBXL6IAynXR0bXSDBxW39qbX8D2IGsPM=', 'Local server', 1, 1, 'xxx.xxx.151.57', 'RPC', '');
Will Update when tested
George
-
Hi,
Authentication key:
This field is blank
George
-
Rainner try installing latest build it should sort out your problems
George
-
Will uninstall as;
/etc/init.d/centovacast stop
rm -f /etc/cron.d/centovacast /etc/init.d/centovacast /etc/centovacast.conf
rm -rf /usr/local/centovacast
userdel centovacast
userdel ccuser
& then reinstall
George