Centova Technologies Forum
Centova Cast v3 => Bugs and issues => Topic started by: Mark Carney on August 10, 2014, 05:36:19 am
-
Hi,
I have been trying without any luck to install liquidsoap for a couple of days, originally it failed with an install error as reported by others here on the forum however when trying again today with the command below I am getting the following reply, so has it currently been disabled does anyone know or am I missing something here with regards to the correct install command?
#/usr/local/centovacast/sbin/update --add liquidsoap
Checking Centova Cast Common Files ...
Not updated, skipping
Does the above mean I have a previously corrupted install and if so what's the best way to ensure liquidsoap is removed from the server so I can try again.
Many thanks.
-
try:
/usr/local/centovacast/sbin/update --add liquidsoap --force
-
Thx AlexiuB for your reply,
I tried your suggestion with the following result?
FYI I am running on a Centos 6.5 server
#/usr/local/centovacast/sbin/update --add liquidsoap --force
#: command not found
so tried the following command
#/usr/local/centovacast/sbin/update --force add liquidsoap
No update specification available for liquidsoap.
#
Regards
Mark
-
Have just tried the following after thinking about it some more with the following result.
#/usr/local/centovacast/sbin/update --force --add liquidsoap
Checking Centova Cast Common Files ...
Downloading Centova Cast Common Files ...
Verifying archive integrity ...
Unpacking archive ...
Installing Centova Cast Common Files ...
Installation successful
#
Regards
Mark
-
Some more tries and their results as per reading the below, note tried both add -- and --add with no differance:
http://www.centova.com/doc/cast/installation_manual/07_adding_additional_software
Liquidsoap
Package name: liquidsoap
Optional: add --liquidsoap-fromsrc to build the latest Liquidsoap from source instead of using a .deb package
Optional: add --liquidsoap-rebuild to build even if the latest available version is already installed
My results below:
#/usr/local/centovacast/sbin/update add --liquidsoap -fromsrc
#: command not found
#/usr/local/centovacast/sbin/update --add liquidsoap -fromsrc
#: command not found
#/usr/local/centovacast/sbin/update add --liquidsoap -rebuild
#: command not found
#/usr/local/centovacast/sbin/update --add liquidsoap -rebuild
#: command not found
Regards
Mark
-
wth, did u try it without the #
-
Hi tiggastyle,
Thx for the reply, the # represents the line start as per PuTTY terminal I use remotely here at home, so it's not actually input by me. ;)
Regards
Mark
-
oh Okay.
What is happed when u made :
cd /usr/local/centovacast/sbin/
./update --add liquidsoap
-
Hi tiggastyle,
Here is a straight copy and past of the output from PuTTY.
[root@s15943566 ~]# cd /usr/local/centovacast/sbin/
[root@s15943566 sbin]# ./update --add liquidsoap
Checking Centova Cast Common Files ...
Not updated, skipping
Regards
Mark
-
I am having the same problem.... I get the errors
Error: Package: ocaml-ocamldoc-3.11.2-2.el6.i686 (base)
Requires: ocaml = 3.11.2-2.el6
Available: ocaml-3.11.2-2.el6.i686 (base)
ocaml = 3.11.2-2.el6
Installing: 1:ocaml-3.12.0-21.el6.i686 (atrpms)
ocaml = 1:3.12.0-21.el6
Error: Package: ocaml-camlp4-devel-3.11.2-2.el6.i686 (base)
Requires: ocaml = 3.11.2-2.el6
Available: ocaml-3.11.2-2.el6.i686 (base)
ocaml = 3.11.2-2.el6
Installing: 1:ocaml-3.12.0-21.el6.i686 (atrpms)
ocaml = 1:3.12.0-21.el6
You could try using --skip-broken to work around the problem
You could try running: rpm -Va --nofiles –nodigest
And
Building pcre-ocaml ...
make[1]: Entering directory `/usr/local/src/liquidsoap/pcre-ocaml-6.2.5/lib'
make[2]: Entering directory `/usr/local/src/liquidsoap/pcre-ocaml-6.2.5/lib'
ocamldep pcre.mli > ._bcdi/pcre.di
/bin/sh: line 3: ocamldep: command not found
make[2]: *** Deleting file `._bcdi/pcre.di'
ocamldep pcre.ml > ._d/pcre.d
/bin/sh: line 5: ocamldep: command not found
make[2]: *** Deleting file `._d/pcre.d'
ocamlc -c -cc "cc" -ccopt "-fPIC -O2 \
-DPIC \
-o pcre_stubs.o " pcre_stubs.c
/bin/sh: ocamlc: command not found
make[2]: *** [pcre_stubs.o] Error 127
make[2]: Leaving directory `/usr/local/src/liquidsoap/pcre-ocaml-6.2.5/lib'
make[1]: *** [byte-code-library] Error 2
make[1]: Leaving directory `/usr/local/src/liquidsoap/pcre-ocaml-6.2.5/lib'
make: *** [all] Error 2
Make failed for pcre-ocaml-6.2.5.tar.gz; aborting
Installer exited with error, aborting
I am using Centos 6.5. I have tried all the suggestions in this post with the same results. I am guessing our problems have to do with ocaml. I have tried everything i can think of to install this package, but can not get ocaml installed.
-
#/usr/local/centovacast/sbin/update --add liquidsoap
Checking Centova Cast Common Files ...
Not updated, skipping
Does the above mean I have a previously corrupted install and if so what's the best way to ensure liquidsoap is removed from the server so I can try again.
Many thanks.
Yes, and you can follow this instructions to get rid of a bad installation.
rm -r /usr/local/src/liquidsoap /usr/local/centovacast/liquidsoap /usr/local/centovacast/etc/update.d/*liquid*.*
/usr/local/centovacast/sbin/update
/usr/local/centovacast/sbin/update --add liquidsoap
I am having the same problem.... I get the errors
Error: Package: ocaml-ocamldoc-3.11.2-2.el6.i686 (base)
Requires: ocaml = 3.11.2-2.el6
Available: ocaml-3.11.2-2.el6.i686 (base)
ocaml = 3.11.2-2.el6
Installing: 1:ocaml-3.12.0-21.el6.i686 (atrpms)
ocaml = 1:3.12.0-21.el6
Error: Package: ocaml-camlp4-devel-3.11.2-2.el6.i686 (base)
Requires: ocaml = 3.11.2-2.el6
Available: ocaml-3.11.2-2.el6.i686 (base)
ocaml = 3.11.2-2.el6
Installing: 1:ocaml-3.12.0-21.el6.i686 (atrpms)
ocaml = 1:3.12.0-21.el6
You could try using --skip-broken to work around the problem
You could try running: rpm -Va --nofiles –nodigest
And
Building pcre-ocaml ...
make[1]: Entering directory `/usr/local/src/liquidsoap/pcre-ocaml-6.2.5/lib'
make[2]: Entering directory `/usr/local/src/liquidsoap/pcre-ocaml-6.2.5/lib'
ocamldep pcre.mli > ._bcdi/pcre.di
/bin/sh: line 3: ocamldep: command not found
make[2]: *** Deleting file `._bcdi/pcre.di'
ocamldep pcre.ml > ._d/pcre.d
/bin/sh: line 5: ocamldep: command not found
make[2]: *** Deleting file `._d/pcre.d'
ocamlc -c -cc "cc" -ccopt "-fPIC -O2 \
-DPIC \
-o pcre_stubs.o " pcre_stubs.c
/bin/sh: ocamlc: command not found
make[2]: *** [pcre_stubs.o] Error 127
make[2]: Leaving directory `/usr/local/src/liquidsoap/pcre-ocaml-6.2.5/lib'
make[1]: *** [byte-code-library] Error 2
make[1]: Leaving directory `/usr/local/src/liquidsoap/pcre-ocaml-6.2.5/lib'
make: *** [all] Error 2
Make failed for pcre-ocaml-6.2.5.tar.gz; aborting
Installer exited with error, aborting
I am using Centos 6.5. I have tried all the suggestions in this post with the same results. I am guessing our problems have to do with ocaml. I have tried everything i can think of to install this package, but can not get ocaml installed.
This is not the same problem at all, it is a known issue with 32bit Centos distributions, it should be fixed in a few more days.
-
I get ( configure: error: speex not found ) right at the end of the install, any idea how to solve this?
checking pkg-config is at least version 0.9.0... yes
configure: error: speex not found
Configure failed for liquidsoap-1.1.1-full.tar.gz; aborting
Installer exited with error, aborting
-
The solution is just to hang tight. :) This is literally the only thing I'm personally working on until I get it building under all supported versions of our supported Linux distributions. Unfortunately CentOS 5 has made that rather difficult, but I'm nearly there. I expect to have an update later today or sometime tomorrow.
-
I replied to ticket #ZX8-NWI0-290
I'm running Centos 6.5 ( 64-Bit ) on my server